Work Pro Digiline Serie Manual De Usuario página 29

3. Once the parameter has been edited, the application generates the ASCII string in the upper window.
4. This line is generated in two formats at once, depending on what you go for. either by
Ethernet port or by RS232 serial port. (See Section 2.2.3. OSC HISTORY for additional information).
5. Press Copy Ethernet or Copy
copied to the clipboard for later use.
NOTE: Click the Help icon in the lower left corner for additional information on this application.
NOTE: For an explanation of the commands that incorporate Digiline series devices, see section 3.3. GPI
for additional information.
Serial , according to the control mode to use, and the command line will be
In this example we have selected
command Output : Gain Value and
established a value of 3 dB in the
output 1
MX
MKII
PAGE 28