Work Pro Digiline Serie Manual De Usuario página 9

1st Possibility
A. Create a virtual device and configure it
Two devices in project Inspector: Physical (green circle),
Virtual (no circle)
2nd Possibility
A. Create a virtual device and configure it. When finish, store all information in a project file (*.wpj) using File Tab. In the installation.
Load the project using the same File tab. Now follow the previous B, C, D points.
2.2.2. PROJECT INSPECTOR
The PROJECT INSPECTOR window allows you to create projects with any WorkCAD compatible device associating
it with a virtual device from the library or working "in situ" with the physical device connected to the network.
The creating project involves ALL devices grouped under the project. Click the File tab to managing projects, creating a
new one, opening an existing or saving a new project.
When you select one device (using Library or Network tabs), the device will be assigned to a group on this menu.
Depending on the color of the circle closed the name, a different state will be present:
B. Load a device from Network
Digiline MX in
CONNECTED state
Press Edit to change featuras like:
- Interface language (English/Spanish)
- Enable/Disable the search of updates
- Enable/Disable the hardware acceleration
(This features must be disable if the software
shows problems loading the device)
MX
MKII
C. Select virtual Device
and press Copy
Device.
D. Select Physical
Device and press
Paste Device.
PAGE 08