General Information/Assembly/Dimension Tables/Product Description/Height Adjustment/Tilt Function/Legrest/Recycling - Etac Swift Mobil Tilt Manual De Instrucciones

EN
General information
Thank you for choosing a shower chair from Etac.
In order to avoid injury during handling and use, please
read through this manual first. In the manual, the user is the
person sitting in the chair. The assistant is the person opera-
ting the chair.
Swift Mobil Tilt is a shower and toilet chair intended to
make hygiene care easier for people with reduced mobility
and their carers.
Swift Mobil Tilt has been tested by a testing institute and
complies with the requirements stated in EN ISO 10993-1
and SS EN 12182.
It is designed for use in showers, with hand basins and
over toilets, as well as for transport to and from the sanitary
room.
Every component of the chair is designed to make things
easier for users and assistants.
This symbol appears in the manual along with text. It
indicates instances where the safety of the user or the
assistant may be at risk.
Assembly/Dimension table
fig. A fig. H
Product description
fig. B
1 Bolt
2 Legrest
3 Seat
www.ortopediaguzman.com
www.ortopediaguzman.com
4 Armrest
5 Backrest upholstery
6 Headrest
www.ortopediaguzman.com
Height adjustment
fig. C
The height can be adjusted with ease by positioning the
bolt in the required position (fig. C 1).
Swift Mobil Tilt is height-adjustable between 45 and
60 cm (fig. C 2).
Check that both sides are similarly adjusted, other-
wise stability will be reduced. Do not use the chair if
the bolt (orange) is not locked (fig. C 3).
Tilt function
fig. D
The assistant can adjust the sitting angle with ease by hol-
ding in the handle and tilting to the required position.
Make sure that the wheels are locked if the tilt
function is used when the user is sitting in the chair.
Legrest
fig. E
The assistant can easily raise and swivel the legrests to the
side for the user to sit down in or get up out of the chair
(fig. E 1). The footrests are detachable.
Various height adjustment options are available by
moving the locking pin (fig. E 2). The legrests have 6 diffe-
rent height settings.
Armrest lock (accessories)
fig. F
Secure the armrest in the lowered position by inserting the
locking pin in the hole. When the armrest lock is not in use,
the pins can be stored in pockets in the back of the backrest
upholstery.
Recycling
This product should be recycled as per national regulations.
12