Locating A Disc By Name; List-Up; Additional Information; Precautions - Sony RM-X69RF Manual De Instrucciones

5
Press (NAME LIST/NAME EDIT) for more
than two seconds.
The unit returns to the normal CD playback
mode.

Locating a disc by name

— List-up

(CD changer with custom file function)
This function can be performed after discs
have been assigned a personalized label. For
more information on disc labels, refer to page
9.
1
Press (NAME LIST/NAME EDIT)
momentarily.
The name assigned to the disc currently
playing will appear on the display.
EN
Note
This function may not work when a changer without list
up feature is connected.
2
Pressing (NAME LIST/NAME EDIT)
continuously will display in order the
titles.
Notes
• If there are no discs in the magazine, "NO DISC" will
appear on the display.
• If a disc has not been assigned a personalized label,
"******" will appear on the display.
• If the disc information has not been read in by the unit,
"NOT READ" will appear on the display. If the disc
information has not been loaded into the unit, "NOT
READ" will appear on the display. To execute loading,
first push (DISC), then choose the disc that has not been
loaded.
3
When you have found the desired disc,
press (DISC) to playback the disc (Direct
search function).
Note
You can still execute the direct search function even if the
"******" message appears on the display (unnamed disc).
10
Additional
Information

Precautions

• If your car was parked in direct sunlight
resulting in a considerable rise in
temperature inside the car, allow the system
to cool down before operating it.
• If no power is being supplied to the system,
check the connections first. If everything is in
order, check the fuse.
• Avoid installing the system in places:
— subject to temperatures exceeding 55 °C
(131 °F).
— subject to direct sunlight.
— near heat sources (such as heaters).
— exposed to rain or moisture.
— exposed to excessive dust or dirt.
— subject to excessive vibration.
If you have any questions or problems
concerning your unit that are not covered in
this manual, please consult your nearest Sony
dealer.

Maintenance

Fuse replacement
If the fuse blows, check the power connection
and replace the fuse. If the fuse blows again
after replacement, there may be an internal
malfunction. In this case, consult your nearest
Sony dealer.
Warning
Use the specified amperage fuse.
Use of a higher amperage fuse may cause
serious damage.