Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
INTERF ACE
REAR VIEW
6 Audio Output
This connector is for output of analog audio and is compatible with Molex 70553. Choose a
suitable connection cable.
Pin
Name
1
L
2
G
3
G
4
R
7 Device Configuration Jumper
The Switch changes to ON when a jumper is added (Pin 1 is on lower-right).
Verify that the power is OFF before changing the jumper setting.
The factory default forPin # 1 is ON.
Pin
Name
1
MA
2
SL
3
CS
4
5
8 Host IDE Interface
Use a 40-pin flat cable to connect the drive to the computer's Enhanced-IDE port. The maximum
length for this cable is 18 inches.
9 DC Input
Pin
Name
1
+12
2
G
3
G
4
+5
8
En
Function
Left channel audio output
Ground
Ground
Right channel audio output
Function
on The drive is the master device
on The drive is the slave device
on Set the drive to Cable Select
Reserved
Reserved
Function
Power supply input for DC +12 V
Ground
Ground
Power supply input for DC +5 V
Publicidad
Tabla de contenido
