Important Information About Lp Gas Connections; What Is A Regulator; Regulator Connections - Weber SPIRIT E-210 GBS Manual De Instrucciones

Ocultar thumbs Ver también para SPIRIT E-210 GBS:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT INFORMATION ABOUT LP GAS CONNECTIONS

WHAT IS A REGULATOR?

Your Weber
gas grill is
®
equipped with a pressure
regulator, which is a device to
control and maintain uniform
gas pressure as gas is
released from the LP tank.

REGULATOR CONNECTIONS

Each Weber
LP regulator is designed for vapor
®
withdrawal and is equipped with a UL-listed Type 1 tank
connection as described in the latest edition of ANSI
Z21.58. THE LP TANK THAT YOU CONNECT TO THE
REGULATOR MUST BE EQUIPPED WITH A COMPATIBLE
TYPE 1 CONNECTION IN THE TANK VALVE. This Type 1
connection allows you to make a fast and safe hookup
between your Weber
gas grill and the LP tank.
®
NOTE: Gas will not flow from the tank unless the Type 1
coupling is fully engaged.
The pressure regulator supplied with the Weber
grill must be used. This regulator is set for 11 inches
of water column pressure.
Replacement pressure regulator and hose
assemblies must be those specified by Weber-
Stephen Products LLC.
Be sure the regulator is mounted with the small vent
hole pointed downward so that it will not collect water.
This vent should be free of dirt, grease, bugs, etc.
The gas connections supplied with your Weber
appliance have been designed and tested to meet
100% of CSA and ANSI requirements.
m WARNING: Replacement LP tanks must
match the regulator connection supplied
with this Weber
gas appliance.
®
2
1
2
1
1
Type 1 Valve
2
Hand Wheel
3
External Thread
gas
®
gas
®
TYPE 1 CONNECTIVE COUPLING
3
3
4
5
5
4
4
5
Thermally Sensitive Nut
Propane Regulator
WWW.WEBER.COM
®
9

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Spirit e-310 gbs

Tabla de contenido