TECshow BEAMPIX 14 Manual De Usuario página 6

ment, such as in a discotheque, it is recommended
to use a DMX terminator. This helps in preventing
corruption of the digital control signal by electrical
noise. The DMX terminator is simply an XLR plug
with a 120Ω resistor connected between pins 2 and
3, which is then plugged into the output XLR socket
of the last fixture in the chain. Please see illustrations.
5. MENU INSTRUCTION
Press "MENU" to browse the different function,
press "ENTER" to Next Menu(Sub-Menu) Press "UP"
or "DOWN" to choose the desire function and Press
"ENTER" to confirm. Press "MENU" to return back
last menu.
DMX
MASTER
No. Menu
1 Addr
2 Chnd
3 SLnd
4 SoUn
5 Auto
6 Colo
7 Manu
P. 6
Tecshow Beampix 14 | English version
SLAVE
SOUND
Value
1-512
6ch/8ch/12ch/60ch
Mast
SL 1
SL 2
Su 0-59
Se 00-99
Au 0-59
Sp 1-9
Co 1-15
Red 0-255
Gree 0-255
Blue 0-255
Whit 0-255
Function
DMX Address Set
DMX Channel select
Master / Slave select
Sound Control Mode, 0-59 built-in program
Sound sensitive 0-99(99 is the most Sensitive)
Auto Mode, 0-59 Built-in program
Auto Running Speed select 1-9
Color choose
Manual mode