Product Description; Product Components; Product Overview - DENTSPLY SmartLine Max Instrucciones De Uso

Caution: For dental use only.
U.S.A.: Rx only.

1. PRODUCT DESCRIPTION

SmartLite ® Max L.E.D. Curing Light is a pen-style, high-power output, cordless light polymerization device for
use in dentistry. SmartLite
SmartLite ® Max Light incorporates two types of LEDs to achieve broad spectral output to polymerize virtually
all the resins in the market and a high power mode to produce super fast curing effect. It is a small probe-style
light with many features normally found on larger lights. The curing performance is proven to be similar to the
conventional halogen curing light, making it a versatile LED curing light suitable for virtually all chairside curing
light tasks.

1.1 Product components

Handpiece Assembly
Curing Probe housing the LEDs
Charging Base Assembly
Wall Plug-in Power Supply
Eye Protection Assembly
Barrier Sleeves

1.2 Product overview

The SmartLite ® Max Light utilizes state-of-the-art semiconductor diodes to generate the light energy used by
this device. This technology allows for a more reliable product that uses less energy and is housed in a smaller
package than traditional halogen lamp curing lights. This allows the creation of a device that is small, portable,
efficient, and should provide many years of consistent use. SmartLite
rechargeable battery, allowing cord-free operation. The power supply can be attached if needed, ensuring
consistent uninterrupted use the entire day. The SmartLite
complete 360° range of movement, allowing you to see the controls while applying light at any angle desired.
SmartLite ® Max L.E.D. Curing Light features:
• Probe housing the 2 LED's
• High power output (1200-1400mW/cm
below) composite resin shades (see Curing Card for specific times)
• Wide spectral output (400-460nm) cures virtually all available VLC materials
• Cordless with corded back up for uninterrupted use
• 360° rotating probe
• Sleek, convenient and lightweight (220g/7.8oz)
• Quiet, no fan
• Rechargeable lithium ion battery
• Simple controls, push buttons labelled with icons
• Convenient, informative, attractive display with icons for different modes, curing time selection and the
battery status
• Four cure modes, easy to select, with mode icon on display (standard, boost, ramp and pulsed)
• 90° angle light guide
• Automatically goes to sleep mode in 10 minutes
• Adjustable timer (5, 10, 15, 20 seconds) with countdown display
• Audible signals confirm button presses to select the mode and time, and every 5 seconds during the curing
process
• Built in radiometer on base with color-coded LED scale indicator
• The unit turns off if the temperature at the probe tip reaches 41°C to minimize exposure of personnel and
patients to excessive temperatures
• Sustained high energy light output regardless of the battery charge during the operation
1.3 Indications
Curing of all dental products with camphorquinone (CQ) and L-TPO photoinitiators.
® Max Light offers a dual advantage of super fast and broad spectral curing of resins.
2 ) ensures super fast 5-second cure for some commonly used (A3 and
® Max Light features a built in
® Max Light also features a fully rotating head, with a
1