empty. (It is recommended to position the fog
machine in such a way that the fog will stream out
through an open window or door.)
6) Replace the nozzle.
7) Refill the unit with fog fluid and create fog for
approx. 3 minutes in order to remove any acid resi-
dues from the unit.
6 Specifications
Heating power: . . . . . . . . . . 1200 W
Heating-up time after
setting into operation: . . . . . approx. 10 minutes
Tank capacity: . . . . . . . . . . . 2.5 litres
Fog output: . . . . . . . . . . . . . approx. 510 m
Power supply: . . . . . . . . . . . 230 V~/50 Hz
Power consumption: . . . . . . 1200 VA
Ambient temperature: . . . . . 0 – 40 °C
Dimensions: . . . . . . . . . . . . 250 x 270 x 435 mm
Weight: . . . . . . . . . . . . . . . . 10.5 kg
Subject to technical modification.
All rights reserved by MONACOR
be reproduced in any form or by any means for any commercial use.
3
per
minute
®
INTERNATIONAL GmbH & Co. KG. No part of this instruction manual may
GB
11