Description - Hilti TE16 Manual De Instrucciones

2. Description

The tool is an electrically powered rotary hammer with
pneumatic hammering mechanism. The tool is intended
for professional use.
2.1 Use of the tool as intended
en The tool is designed for drilling in concrete and masonry.
The tool may also be used for light chiseling work on
masonry and for finishing concrete surfaces.
The tool is intended for professional use.
The tool may be operated, serviced and repaired only
by authorized, trained personnel. This personnel must
be informed of any special hazards that may be encoun-
tered.
The working environment may be on a construction
site or in a workshop and the tool may be used for ren-
ovation, conversion or new building work.
The tool may be operated only when connected to a
power supply providing a voltage and frequency in com-
pliance with the information given on its rating plate.
Changes or modifications to the tool are not permis-
sible.
To avoid the risk of injury, use only original Hilti acces-
sories and additional equipment. Observe the infor-
mation printed in the operating instructions concern-
ing operation, care and maintenance. The tool and its
ancillary equipment may present hazards when used
incorrectly by untrained personnel or when used not
as directed.
2.2 Chucks
– TE-C (SDS plus) chuck
– TE-T (SDS top) chuck
2.3 Theft protection system (option with TE16-M)
The power tool may be equipped with the optional theft
protection system. If the power tool is equipped with
this feature, it can be activated and made ready for
operation only by way of the corresponding activation
key.
2.4 Switches
2.4.1 Switches on the TE 16
Speed control switch for smooth starting.
Function selector switch for:
– Drilling without hammering
– Hammer drilling
14
Printed: 07.07.2013 | Doc-Nr: PUB / 5070798 / 000 / 00
2.4.2 Switches on the TE 16-C
Speed control switch for smooth starting.
Function selector switch for:
– Drilling without hammering
– Hammer drilling
– Chisel adjustment (12 positions)
– Chiseling
2.4.3 Switches on the TE 16-M
Speed control switch for smooth starting.
Function selector switch for:
– Drilling without hammering 2
– Drilling without hammering 1
– Hammer drilling
– Chisel adjustment (12 positions)
– Chiseling
2.5 Grips
– Adjustable side handle with depth gauge
– Vibration-absorbing grip
2.6 Protective devices
– Mechanical slip clutch
2.7 Lubrication
– Oil lubrication
2.8 Items supplied as standard
– The electric tool
– TE-C or TE-T chuck
– Side handle with depth gauge
– Operating instructions
– Toolbox
– Cleaning cloth
– Grease
– Dust shield