Armrests; Flip-Back Height Adjustable Armrests; Padded Swing-Away Armrests - Sunrise Medical Quickie 2,2 HD Manual De Instrucciones

E NG LIS H
I. ARMRESTS
17
Sunrise medical offers several different types of armrests. Fixed, swing-away, and Flip-back armrests. Flip-back
armrests can be detached or can flip back to allow lateral transfers. They are height adjustable (1" increments)
by flipping the adjustment lever and moving the armrest pad (1) up or down to the desired height.
1. Basic Installation
a. Slide the outer armpost (4) into the receiver mounted to the wheelchair frame.
b. The armrest should lock into place.
2. Height Adjustment
a. Release the upper securing lever (2) .
b. Slide armpad up or down to desired height.
c. Return lever to locked position.
3. Removing Armrest
a. To remove, grasp the unlocking lever (3) and pull up on the Armrest..
4. Replacing Armrest
a. Slide armrest back into receiver.
b. Make sure that the unlocking lever (3) returns to the locked position against armpost
J. FLIP-BACK HEIGHT-ADJUSTABLE ARMRESTS
1. Installation
a. Slide the outer armpost into the receiver mounted to the wheelchair frame.
b. The armrest will automatically lock into place.
2. Height Adjustment
a. Rotate height release lever (2) to second stop.
b. Slide armrest pad (1) up or down to desired height.
c. Return lever (2) to locked position against armpost.
3. Flipping Armrest Back
a. Depress the release latch (3) and pull the armrest toward the back of the wheelchair.
b. To return armrest to operating position, push armpad down until it locks firmly into place.
4. Removing Armrest
a. Rotate height release lever (2) to first stop and remove the armrest.
5. Replacing Armrest
a. Slide armrest back into receiver.
b. Return release lever (2) to locked position against armpost.
K. PADDED SWING-AWAY ARMRESTS
1. Installation
Slide armrest into receiver tube (A) on rear of frame.
2. Swinging Away
Lift armrest out of locked position and rotate to the side.
3. Removing Armrest
Pull armrest straight out of receiver.
MK-100070 RevA
18
19
16
VIII. USE AND MAINTENANCE
1
6
2
4
7
1. Armrest pad
2. Height Release Lever
3. Release lever
4. Outer armpost
5. Transfer bar
6. Side panel
7. Receiver
8. Receiver adjustment
hardware
1
3
1. Armrest Pad
2. Upper Securing Lever
3. Release Latch
4. Armrest Panel
5. Rear Receiver
6. Armrest Release Pin
17
5
3
8
18
2
4
6
5
19