Inserting The A 606 2/3 Level; Removing The A 606 2/3 Level - Miele professional A 503 Instrucciones De Manejo

Inserting the
A 606 2/3 level
Removing the
A 606 2/3 level
The A 606 2/3 level can be inserted into the top level of the A 503
mobile unit.
The level connector can be connected to the middle or right water
connection of the mobile unit. Another module can be inserted in ad-
dition to the 2/3 level.
To ensure that the spray arm of the 2/3 level is not blocked, the mo-
bile unit must be used without the bar in the top level.
Remove the bar from the top level of the mobile unit.

Plug the level connector into the water connection of the mobile

unit at a flat angle.
Then push the level's retainer slightly towards the water inlet and

lower the level to lock the module in place behind the struts of the
mobile unit.
Push the level's retainer slightly towards the water inlet and pull it

out from behind the struts of the mobile unit.
Disconnect the level from the mobile unit's water connection and

remove it.
en - Areas of application
35