Bobbin Winding - ALFA COMPAKT 500E Manual De Instrucciones

z
q
c
e
b
n
x
w
v

Bobbin Winding

z Hold the thread with both hands and pass the thread
under the thread guide.
q Thread guide
x Draw the thread toward you and guide the thread
around the bobbin winding thread guide.
w Bobbin winding thread guide
c Pass the thread through the hole in the bobbin
from the inside to the outside. Put the bobbin on
the bobbin winder spindle.
e Bobbin winder spindle
v Push the bobbin winder spindle to the right.
The LCD screen will show
b Hold the free end of the thread in your hand and
start the machine.
Stop the machine when the bobbin has been
wound a few layers, and cut the thread close to
the bobbin.
n Start the machine again. When the bobbin
is fully wound, it will stop automatically.
Stop the machine and return the bobbin
winder spindle to its original position by moving it
to the left, and cut the thread with a pair of
scissors. Remove the bobbin from the bobbin
winder spindle.
NOTE:
The machine will not sew until the spindle has been
returned to the left.
18
.