Setting The Self-Cleaning Mode; Pyrolyse (Self-Clean) - Fulgor Milano F1SP241 Serie Manual De Uso & Mantenimento

Before using the Self-Cleaning Mode please read the Oven Care and Cleaning page carefully and follow the
Preparing the Oven for Self-Cleaning first. (see page 23)

Pyrolyse (Self-Clean)

Turn the mode knob in the proper position than press
the +/- knob to start a cleaning cycle.
The clean time can be set according to the same rules
of the automatic functions, and therefore the pyrolitic
cycle can be delayed.
The maximum allowed clean time is 3 hours, the
minimum 1 hour. The standard time is 1h:30min, the
clock display shows P1:30. At the end of the self-
cleaning activity the display shows P--- steady and
flashing. The writings on the display disappear when
the mode selector is placed in the ZERO position. The
door remains locked until the oven temperature drops
below the safety threshold, at this time the control
unlocks the door.
The cooling fan starts as soon as the function is
selected and turns to its higher speed when the inner
parts get hot. The oven temperature is automatically
set to 460°C in order to perfectly clean the cavity.
The control also locks immediately the door in order to
guarantee the user safety, given that the temperature
inside gets very hot. A lock led shows the status of the
latch mechanism at any time:
- Door unlocked, lock led off.
- Door locked, lock led always on.
- Latch moving, transition in progress, lock led
flashing.
To reuse the oven after a pyrolyse, turn the mode
selector to ZERO (OFF) position.
24

Setting the Self-Cleaning Mode

Use & Care Manual
ENGLISH