Lcd Tv And Operating Buttons; Viewing The Connections - Back Connectors - CONTINENTAL EDISON CETVLCD40FHDR3 Manual De Instrucciones

LCD TV and Operating Buttons

FRONT and REAR VIEW

Viewing the Connections - Back Connectors

1. SCART 2 inputs or outputs for external devices.
2. SCART 1
input or output for external devices. Connect the SCART cable between SCART socket on
TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV
mode.
3. Component Video Inputs (YPbPr)
You can connect the component video and audio sockets with a device that has component output.
Connect the component video cables between the COMPONENT VIDEO INPUTS on on the TV and
the component video outputs of your device. While connecting, be sure that the letters on your TV, "Y",
"Pb", "Pr" correspond with your device's connectors.
4. PC/YPbPr Audio Inputs
TV via YPbPr. Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output
of your PC to enable PC audio. Connect the audio cable between AUDIO INPUTS on the TV and audio
outputs of your device to enable component audio.
5. SPDIF Coaxial Out
Use an SPDIF coaxial cable to transfer audio signals to a device that has SPDIF input.
Control buttons VIEW
are used for connecting component video.
are used for connecting audio signals of a PC or a device that connects to the
outputs digital audio signals of the currently watched source.
English - 43 -
Control Buttons
1. Standby On/Off button
2. TV/AV button
3. Programme Up/Down buttons
4. Volume Up/Down buttons
Note: Press "
" buttons at the same time
to view main menu.
" and"