Installation; Auto Channel Scan Menu Operation; Manual Tuning; Digital Manual Search - CONTINENTAL EDISON CETVLCD40FHDR3 Manual De Instrucciones

• Press OK button to quit channel list and watch TV.

Installation

HINT: Auto tuning feature will help you to retune the TV
set in order to store new services or stations.
Press "MENU" button on the remote control and
select Installation by using " " or " " button. Press
OK button and the following menu screen will be
displayed.
Select Automatic Channel Scan (Retune) by using "
"/" " button and press OK button. Automatic Channel
Scan (Retune) options will be displayed. You can
select Digital Aerial, Analog or Digital Aerial-Analogue
tuning using " "/" " and OK buttons.

Auto Channel Scan Menu Operation

Digital: Searches and stores aerial DVB stations.
Analogue: Searches and stores analog stations.
Full: Searches and stores both analog and aerial
DVB stations.
• Whenever you select an automatic search type and
press OK button, a confirmation screen will appear
on the screen. To start installation process, select
Yes, to cancel select No by using ." " or " " and
OK button.
• After auto channel scan type is set, and selected
and confirmed, the installation process will start
and progress bar will move along. Press "MENU"
button to cancel process. In such a case, located
channels are not stored.

Manual Tuning

HINT: This feature can be used for direct broadcast
entry.
• Select Manual Channel Scan from the Installation
menu by using " "/" " and OK buttons. Manual
Scan options screen will be displayed.
• Select the desired
" button. Manual search options will change
accordingly. Use " "/" " button to highlight an item
and then press " " or " " button to set an option.
You can press "MENU" button to cancel.

Digital Manual Search

In manual channel scan, the number of the multiplex
or frequency are entered manually and only that
multiplex or frequency are searched for the channels.
After selecting search type as Digital, you can enter
the multiplex or frequency number using the numeric
buttons and press OK button to search.

Analogue Manual Search

After selecting search type as analogue, you can use
" "/" " button to highlight an item and then press "
" or " " button to set an option.
Enter the channel number or frequency using the
numeric buttons. You can then press OK button
to search. When the channel is located, any new
channels that are not on the list will be stored.

Analog Fine Tune

Analog Fine Tune from the Installation menu
• Select
by using " " or " " and OK buttons. Analog fine tune
English - 51 -
Search Type using " " or "