First Time Installation; Clear Service List (*); Managing Stations: Channel List; Operating The Channel List - CONTINENTAL EDISON CETVLCD40FHDR3 Manual De Instrucciones

screen will be displayed. Analog Fine Tune feature
will not be available if there are no analog channels,
digital channels and external sources stored.
OK button to proceed. Use " " or " " button
• Press
to set Fine Tune. When finished, press OK button
again.

First Time Installation

Select First Time Installation line and press OK button.
Enter the PIN number you have previously set during
the first time installation. If the correct PIN number is
entered, installation process will start.
See the section, "First Time Installation" at the
beginning of instruction book for more information
on the process.

Clear Service List (*)

(*) This setting is visible only when the Country option
is set to Denmark, Sweden, Norway or Finland.
Use this setting to clear channels stored. Press " " or
" " button to select Clear Service List and then press
OK. The following OSD message will be displayed
on the screen:
Press OK to cancel. Select Yes by pressing " " or " "
button and press OK to delete all of the channels.

Managing Stations: Channel List

The TV sorts all stored stations in the Channel List.
You can edit this channel list, set favourites or set
active stations to be listed by using the Channel List
options.
"MENU" button to view main menu. Select
• Press
Channel List item by using " " or " " button. Press
OK to view menu contents.
Select Edit Channel List to manage all stored
channels. Use " " or " " and OK buttons to select
Edit Channel List.

Operating the Channel List

• Press " " or " " button to select the channel that
will be processed. Press " " or " " button to select
a function on Channel List menu.
• Use P+/P- buttons to move page up or down.
• Press BLUE button to view filtering options.
• Press "MENU" button to exit.

Moving a Channel

• First select the desired channel. Select Move option
in the channel list and press OK button.
• Edit Number screen will be displayed. Enter the
desired channel number by using the numeric
buttons on the remote control. If there is a previously
stored channel on that number, a warning screen
will be displayed. Select Yes if you want to move the
channel and press OK.
• Press OK button to process. Selected channel is
now moved.

Deleting a Channel

You can press GREEN button to tag/untag all
channels; YELLOW button to tag/untag channel.
• Select the channel that you want to delete and select
Delete option. Press OK button to continue.
• A warning screen will appear. Select
select No to cancel. Press OK button to continue.

Renaming a Channel

• Select the channel that you want to rename and
select Edit Name option. Press OK button to
continue.
• Pressing "
next character. Pressing " " or " " button toggles
the current character, i.e., 'b' character becomes 'a'
by " " and 'c' by " ". Pressing the numeric buttons
'0...9' replaces the highlighted character with the
characters printed above the button one by one as
the button is pressed.
• When finished, press
"MENU" to cancel.
English - 52 -
" or " " button moves to the previous/
OK button to save. Press
YES to delete,