Technical Data - Bosch+Sohn BOSO med I BS 90 varius privat Manual Del Usuario

14.) After you have taken your readings, open the
valve screw fully turning it to the left, to allow all
air to be released swiftly from the cuff.
If you want to repeat your measurement, allow
at least two minutes for your circulation to get
back to normal. If no further measurements are
required, remove the cuff.

Technical Data

Measurement range: 0 – 300 mmHg
Accuracy of Pressure shown: ± 3 mmHg or 2% of the
reading (whichever is greater)
Storing conditions:
–30°C – 70°C, 15 – 85% rel. humidity
Operating conditions:
10°C – 40°C, 15 – 85% rel. humidity
16
Cleaning of Unit and Cuff
To clean the unit only use a dry, soft cloth. To clean the cuff
– remove the rubber bag. The exterior of the cuff can then
be washed by hand at a maximum temperature of 30 de-
grees Celsius.
Disinfection
For disinfectant wipes (at least 5 minutes exposure
time) of the device and the cuff, we recommend the di-
sinfectant mikrozid sensitive liquid (Schülke & Mayr).
To disinfect the cuff, we recommend spray disinfection.