Maintenance; Cleaning; Replacement Of Batteries; Warranty - Multimetrix CM603 Manual De Uso

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Except for the batteries, the instrument contains no parts that can be
replaced by personnel who have not been specially trained and accredited.
Any unauthorized repair or replacement of a part by an "equivalent" may
gravely impair safety.

4.1. CLEANING

Disconnect everything connected to the instrument and set the switch to OFF.
Use a soft cloth, dampened with soapy water. Rinse with a damp cloth and
dry rapidly with a dry cloth or forced air. Do not use alcohol, solvents, or
hydrocarbons.
Keep the air gaps of the clamp perfectly clean.

4.2. REPLACEMENT OF BATTERIES

If the
symbol is displayed during a measurement, you must replace the
batteries.
Disconnect everything connected to the instrument and set the switch to OFF.
„ Refer to §1.2 to remove the battery compartment cover.
„ Replace all spent batteries with new AAA or LR03 batteries.
Spent batteries must not be treated as ordinary household waste. Take
them to the appropriate recycling collection point.
„ Except as otherwise stated, our warranty is valid for twelve months starting
from the date on which the equipment was sold. Extract from our General
Conditions of Sale provided on request.
„ The warranty does not apply in the following cases:
„ Inappropriate use of the equipment or use with incompatible equipment;
„ Modifications made to the equipment without the explicit permission of the
manufacturer's technical staff;
„ Work done on the device by a person not approved by the manufacturer;
„ Adaptation to a particular application not anticipated in the definition of the
equipment or not indicated in the user's manual;
„ Damage caused by shocks, falls, or floods.

4. MAINTENANCE

5. WARRANTY

15

Publicidad

Tabla de contenido
loading

Tabla de contenido