Electrical Connection - schmalz VS-V/P-W-D K 3C-D Manual De Instrucciones

5 Electrical Connection
NOTE
Incorrect power supply
Destruction of the integrated electronics
4 Operate the product using a power supply unit with protected extra-low voltage
(PELV).
4 The system must incorporate safe electrical cut-off of the power supply in compli-
ance with EN60204.
4 Do not connect or disconnect the connector under tension and/or when voltage is
applied.
NOTE
Connect with the power turned on
Damage to the electronics and/or malfunction
4 Switch off the power supply before connecting cables!
The vacuum switch is supplied with a 4-wire connection cable with open cable ends.
Integrate the Vacuum/pressure switch into your application in accordance with the electrical circuit di-
agram.
EN-US · 30.30.01.02016 · 01 · 11/19 11 / 40