ENGLISH
IMPORTANT SAFEGARDS
1. Make sure to read all the safety precautions below
and look at the illustrations before you start using the
appliance.
2. Use the appliance for its intended use only described
in this manual.
3. The appliance is intended for household use only.
4. In order to protect against the risk of electric short, do
not immerse iron power base into water or any other
liquids.
5. Connect the appliance only to an alternating current of
the voltage specified on the rating plate and only to an
earthed socket. To avoid a circuit overload, do not
operate another high wattage appliance in the same
circuit.
6. Turn the appliance to OFF before plugging or
unplugging from outlet. Never yank cord to disconnect
from outlet; instead, grasp plug and pull to disconnect.
7. Do not allow power cord or supply hose to touch hot
surface.
8. Unplug the appliance from main socket before filling
or empty or when not in use.
9. Do not operate the appliance with a damaged cord or
if the appliance has been dropped or damaged. To avoid
a hazard such as the risk of electric shock, do not
disassemble the appliance, it must be taken to a qualified
serviceman or manufacturer or its service agent for
examination and repair. Incorrect re-assembly can cause
a risk of electric shock when the iron is used.