Krampouz Kemper CEBPD4 Instrucciones De Uso página 18

Instructions
Work surface
Choose an easy-to-clean work surface on which to install
the appliance. The appliance must be at least 20 cm from
any vertical surfaces that are no heat-resistant in order to
prevent damage by heat radiating from the plates. To
ensure maximum ease to use, the top of the plates should
be between 85 and 95 cm from the ground.
Electrical connection
The appliance are delivered with a power cable, type
HO5RRF 3 conductors (phase + neutral + earth), cross-
section 1.5 mm².
They must be connected to the single phase 230 V
network using a 16 A two-pin plug with earth pin.
The safety wire (green and yellow) is connected to the
earth terminal of the device.
If you need to change the power cord of your device
follow to the instructions and references above.
Using
Preparing crepes requires a contribution of fat on the
griddle.
- Lubricating by the wiper pad
- Fat in the batter according to recipes
- 18 -