Safety Instructions For Use In Switchgear - WIKA GD-20 Manual De Instrucciones

3. Safety
Skilled personnel
Skilled personnel, authorised by the operator, are understood to be personnel who,
based on their technical training, knowledge of measurement and control technolo-
gy and on their experience and knowledge of country-specific regulations, current
standards and directives, are capable of carrying out the work described and indepen-
dently recognising potential hazards.
Special operating conditions require further appropriate knowledge, e.g. of aggressive
media.

3.5 Safety instructions for use in switchgear

WARNING!
Residual media on the dismounted gas density sensor can result in
a risk to persons, the environment and equipment.
▶
Take sufficient precautionary measures.
▶
Aggressive media may be present should a failure occur.
The plant operator must ensure that the handling of SF
a qualified company or by qualified persons who have been specially trained in
accordance with IEC 61634, section 4.3.1 or IEC 60480, section 10.3.1.
Installation and plant status which can lead to the formation of atomic hydrogen in the
connection channel of the transmitter must be completely avoided.
The maximum permissible pressures must be complied with.
Valid standards and guidelines for SF
Installation, assembly, commissioning:
BGI 753 (SF plants and equipment in Germany)
■
6
IEC 61634 (Handling of the SF
■
IEC 60376 (New SF
■
IEC 60480 (Used SF
■
CIGRE report 276, 2005 (Practical SF
■
Leaks during operation:
IEC 60376 (New SF
■
IEC 60480 (Used SF
■
CIGRE 2002 ("SF
■
Repair work and maintenance:
IEC 61634 (Use and handling of SF
■
CIGRE 1991 (Handling of SF₆ gas)
■
CIGRE report 276, 2005 (Practical SF₆ gas handling instructions)
■
CIGRE report 163, 2000 (Guide for SF₆ gas mixtures)
■
WIKA operating instructions gas density sensor, model GD-20
gas)
6
gas, technical grade SF
6
gas)
6
6
gas, technical grade SF
6
gas)
6
gas in the electrical industry")
6
gas in high-voltage switchgear and controlgear)
6
gas is only carried out by
6
gas
6
gas)
6
gas handling instructions)
gas)
6
EN
9