English
Storing the Machine
Store the machine in a dry room where it
is protected from frost.
If protection from frost cannot be
guaranteed, draw glycol-based
antifreeze – like that used in motor
vehicles – into the pump:
Insert water intake hose in container
N
with antifreeze
Insert spray gun without spray lance
N
in the same container
Switch on the machine with the
N
spray gun open
Actuate the spray gun until a
N
uniform jet emerges
Keep leftover antifreeze in a sealed
N
container
46
First use after long periods of
storage
During long periods of storage, mineral
residue from the water may be
deposited in the pump. This may cause
the motor to start with difficulty or not at
all.
Connect the machine to the water
N
supply and flush thoroughly with tap
water, leave the power cord
unplugged while doing so
Plug the power plug into the wall
N
socket
Switch on the machine with the
N
spray gun open
RE 98