Storing; Storing The Pressure Washer; Cleaning; Cleaning The Water Intake Screen - Stihl RE 80.0 Manual De Instrucciones

Ocultar thumbs Ver también para RE 80.0:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 48
English
► If the high-pressure washer cannot be trans‐
ported in a frost-proof environment: Protect
the high-pressure washer using antifreeze.

13 Storing

13.1

Storing the pressure washer

► Switch off pressure washer and unplug mains
plug from the socket.
► The pressure washer should be stored in such
a way that the following conditions are fulfilled:
– The pressure washer is out of the reach of
children.
– The pressure washer is clean and dry.
– The pressure washer is in an enclosed
room.
– The pressure washer is in a temperature
range above 0 °C.
– If the pressure washer cannot be protected
from frost in storage: Protect the pressure
washer with antifreeze.

14 Cleaning

14.1
Cleaning the high-pressure
washer and accessories
► Switch off the high-pressure washer and pull
the mains plug out of the socket.
► Clean the high-pressure washer, high-pres‐
sure hose, spray gun and accessories with a
damp cloth.
► Clean the connectors and couplings on the
high-pressure washer, high-pressure hose and
spray gun with a damp cloth.
► Clean vents with a paintbrush.
14.2
Cleaning nozzle and spray
lance
► Rinse the nozzle and spray lance under run‐
ning water and dry with a cloth.
42
► If the nozzle is clogged: Clean the nozzle with
the cleaning pin.
14.3
Cleaning the water intake
screen
1
► Unscrew the connector (1) of the water con‐
nection.
► Remove water intake screen (2) from the con‐
nector.
► Rinse out the water intake screen (2) under
running water.
► Insert water intake screen (2) into the connec‐
tor.
► Attach the connector (1) and tighten it by
hand.
14.4

Cleaning the water filter

The water filter must be disassembled to clean it.
1
► Remove the seal (1) from the filter housing (3).
► Take the filter (2) out of the filter housing (3).
► Rinse out the seal (1) and the filter (2) under
running water.
► Grease the gasket (1) with a fitting grease.
► Reassemble the water filter.
13 Storing
1
2
2
3
0458-001-9821-B

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Re 80.0 x

Tabla de contenido