Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Installation
Position the center unit and subwoofer as shown below with installation.
Cautions
• Be sure to install the center unit on a large, stable stand where it does not fall subject to vibrations, such as from an earthquake, and where it is out of the reach of children.
• Do not stack the center unit and subwoofer directly on top of other playback devices, or vice versa. Doing so may cause a malfunction due to heat and vibrations.
• Do not hold the speaker portion (fabric parts) on the front and the top of the center unit.
• The center unit and subwoofer contain non-magnetic shielding speakers. Do not place magnetically sensitive items (hard disk drive, etc.) near the unit.
• Depending on your installation environment, it may be better to connect the unit and external devices before installing the unit.
• The center unit can be installed on
a TV stand (p. 12) or mounted on a
wall (p. 12). It is equipped with
remote sensors positioned to
support installation on a TV stand
or mounting on a wall.
Wireless connections
The center unit and subwoofer communicate wirelessly. Subwoofer performance may be affected if the subwoofer is placed on a metal rack, or if there is a metal plate between the
subwoofer and the center unit. Use a wired connection to connect the subwoofer to the center unit if sounds are interrupted due to the installation condition (p. 15 in the Owner's
Manual).
Center unit
• To prevent sound reflecting off of walls,
angle the subwoofer slightly toward the
center of the room.
Subwoofer
PREPARATION ➤ Installation
11
En
Publicidad
Capítulos
Tabla de contenido
