Basic Operations; Turning On The Power - JVC KD-S7250 Manual De Instrucciones

Turning on the power

1
Turn on the power.
Note on One-Touch Operation:
When you select a source in step 2 below, the power
automatically comes on. You do not have to press
this button to turn on the power.
2
Select the source.
To operate the tuner (FM or AM),
see pages 8 – 10.
To operate the CD player,
see pages 11 – 13.
3
Adjust the volume.
Volume or audio level (see page 18) indicator
1 3
To increase the volume.
To decrease the volume.
Volume level appears

BASIC OPERATIONS

2
4
Adjust the sound as you want (see
pages 14 – 16).
To drop the volume in a moment
Press briefly while listening to any
source. "ATT" starts flashing on the display, and
the volume level will drop in a moment.
To resume the previous volume level, press the
button briefly again.
• If you turn the control dial clockwise, you can
also restore the sound.
To turn off the power
Press and hold
on the display.
Note:
When you use this unit for the first time, set the built-in
clock correctly, see page 17.
CAUTION on Volume Setting:
CDs produce very little noise compared with other
sources. If the volume level is adjusted for the
tuner, for example, the speakers may be damaged
by the sudden increase in the output level.
Therefore, lower the volume before playing a disc
and adjust it as required during playback.
until "SEE YOU" appears
7