WARNING:
Ensure that all three clips are seated securely onto the
edge of the firebox. Failure to properly attach the firebox
to the burner/base assembly may cause the firebox to
fall and cause serious personal injury.
Align the cut out and tab on the heat tent and firebox and
place onto the supports inside the firebox.
WARNING:
After cooking, allow grill and clips to fully cool before
disassembling the firebox. Unlatching the clips while hot
may cause serious personal injury.
CUT OUT
AND TAB
HEAT TENT
FIREBOX
Fig. 8
ASSEMBLY
STEP 4: INSTALLING THE GREASE CUP
See Figure 9.
Hang the grease cup on the rear of the firebox directly
beneath the drain hole. Be sure the drain hole is not
blocked.
NOTE: Clean the grease cup and firebox after each use.
Do not remove the grease cup until after the grill has
cooled completely. Do not transport the grill with a dirty
grease cup or firebox.
Fig. 9
10 — English
GREASE CUP
DRAIN HOLE
REAR LEG