General Characteristics - Cembre HT131-C Manual De Uso

1. GENERAL CHARACTERISTICS

– Application range: suitable for compression of electrical connectors on conductors up
to ........................................................................................................................................... 400 mm
– Crimping force: ................................................................................................................. 130 kN
– Rated operating pressure: ........................................................................................... 700 bar (10,000 psi)
– Dimensions: length ........................................................................................................ 473 mm (18.6 in.)
width with handles closed ................................................................. 144 mm (5.7 in.)
width with handles open ................................................................... 344 mm (13.5 in.)
– Weight (without dies): ..................................................................................................... 5,5 kg
– Recommended oil: ........................................................AGIP ARNICA 22
– Operating positions. The three operating positions are identified on the main handle, which
rotates relative to the reference symbol,
– Advancing speed. The tool has a twin speed operation and automatically switches from a rapid
advancing speed of the ram to a slower, more powerful crimping speed.
– Safety. The tool is provided with a max pressure valve; MPC1 special manometer, is available as
an optional accessory to check the proper setting of the valve.
3
HYDRAULIC CRIMPING TOOL
HT131-C
(see Fig. 1).
Rest position (Handles locked): lock handles togethe when tool is
not in use.
Release position: close the moveable handle (56) against the main
handle (04), in order to discharge the oil pressure and retract the
dies.
Operating position: operate the moveable handle (56), to build up
pressure and close the dies.
ESSO INVAROL EP22
ENGLISH
2 (800 MCM)
(14.6 sh ton)
(12.3 lbs)
or
or equivalent