General Characteristics - Cembre B135LN-C Manual De Uso

ENGLISH
BATTERY OPERATED HYDRAULIC CRIMPING TOOL
B135LN-C ; B135LN-CA

1. GENERAL CHARACTERISTICS

TOOL TYPE:
Application range: suitable for installing electrical compression connectors
Crimping force kN (sh ton):
Rated operating pressure bar (psi):
Dimensions LxWxH mm (inches):
Weight with battery kg (lbs):
Head: "C" shaped with large jaw opening 42 mm (1.65") see Fig. 1
Motor Volt DC:
Battery Volt / Ah:
Battery charger supply Volt / Hz:
Recommended oil: AGIP ARNICA 32 or SHELL TELLUS TX 32 or equivalent.
Operating speed: the tool has a twin speed operation and automatically
the tool is equipped with a maximum pressure valve.
Safety:
Operating temperature:
Acoustic Noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
– The weighted continuous acoustic pressure level equivalent
A at the work place L is equal to .................................................................................75 dB (A)
pA
– The maximum value of the weighted acoustic displacement
pressure C at the work place L is ..................................................................... < 130 dB (C)
pCPeak
– The acoustic power level emitted by the machine
L is equal to .............................................................................................................85,3 dB (A)
WA
Risks due to vibration (Directive 2006/42/EC, annexe 1, point 2.2.1.1)
Tests carried out in compliance with the indications contained in UNI ENV 25349 and UNI EN 28662
part 1 st Standards, and under operating conditions much more severe than those normally found,
certify that the weighted root mean square in frequency of the acceleration the upper limbs
are exposed to for each biodynamic reference axis does not exceed 2.5 m/sec
This hydraulic tool is powered by a 14.4V battery and is quiet in operation with minimal
vibration.
The residual battery capacity level is automatically displayed after every cycle.
B135LN-C B135LN-CA
for conductors up to 400 mm 2 (800 MCM)
130 (14.6)
700 (10,000)
424 x 94 x 302 (16.7 x 3.7 x 11.9)
7,8 (17.2) 8,1 (17.9)
14.4
14.4 / 3.0 Li-Ion 14.4 / 3.0 Ni-MH
220 - 240 / 50 - 60 120 / 50 - 60
switches from a rapid advancing speed of the ram
to a slower, more powerful crimping speed.
-15°C to +40°C (+5°F to +104°F)
2 .
25
28
06
13
67
72
53
57
59
58
80
64
57
58
59
60
3 32
TABLE 2 - TABLEAU 2 - TABELLE 2 -
22
23
19
17
16
72
53
72
53
203
70
204
32
72
71
53
47
29
60
68
69
76
73
TABLA 2 - TAVOLA 2
70
18
70
18
18
70
18
21
11
23
20
47
26
202
14
05
15