General Characteristics - Cembre B15 Manual De Uso

ENGLISH
BATTERY OPERATED HYDRAULIC CRIMPING TOOL
B15 ; B15Y

1. GENERAL CHARACTERISTICS

TOOL TYPE:
suitable for installing electrical compression connectors
Application range:
kN (sh ton):
Crimping force
Rated operating pressure bar (psi):
Dimensions LxWxH mm (inches):
kg (lbs):
Weight with battery
Volt DC:
Motor
Battery type CB9620H Volt / Ah:
Volt / Hz:
Battery charger supply
AGIP ARNICA 22 or ESSO INVAROL EP22 or equivalent.
Recommended oil:
the tool is equipped with a maximum pressure valve.
Safety:
Operating temperature:
Acoustic Noise (Directive 2006/42/EC, annexe 1, point 1.7.4.2 letter u)
– The weighted continuous acoustic pressure level equivalent
A at the work place L is equal to ............................................................................ 66,8 dB (A)
pA
– The maximum value of the weighted acoustic displacement
pressure C at the work place L is ................................................................... < 130 dB (C)
pCPeak
– The acoustic power level emitted by the machine
L is equal to ............................................................................................................. 75 dB (A)
WA
Risks due to vibration (Directive 2006/42/EC, annexe 1, point 2.2.1.1).
Tests carried out in compliance with the indications contained in UNI ENV 25349 and UNI EN 28662
part 1 Standards, and under operating conditions much more severe than those normally found,
st
certify that the weighted root mean square in frequency of the acceleration the upper limbs
are exposed to for each biodynamic reference axis does not exceed 2.5 m/sec
The part references "B15 , B15Y" include the following:
– Basic tool complete with battery
– Spare battery
– Battery charger complete with CBA96-144 adapter
– Plastic carrying case VAL P22
The tool can be held in one hand while positioning the connector with the other.
It is equipped with automatic return of the dies once the crimping operation is comple-
ted.
Residual battery capacity level is automatically displayed after every cycle.
B15 B15Y
for conductors up to 16 mm (6 AWG)
2
15 (1.7)
340 (4,900)
320 x 117 x 66 (12.6 x 4.6 x 2.6)
1,68 (3.7)
9.6
9.6 / 2.0 Ni-MH
120 / 50 - 60
220 - 240 / 50 - 60
-15°C to +40°C (+5°F to +104°F)
2 .
3
4
19
18
10
9
8
11
210
7
8
9
6
11
220
17
57
21
500
400
15
32
100
1
250
16
20
15
300