Safety Instructions - brennenstuhl SHL DN 54 S Manual De Instrucciones

059814 SHL DN 54 03.12.18 15:22 Seite 4
Workshop Inspection Lamp
SHL DN 54 S

Safety Instructions

• Please read the user guide carefully before using the
inspection lamp and keep it in a safe place.
• Inspect the lamp and the power supply cord for damage
before each use. Do not use the lamp if you see any
damage. The lamp must be destroyed if the power supply
cord is damaged.
Failure to heed this warning may result in potentially
fatal electric shock!
• Do not use the workshop lamp in explosion-prone areas
containing flammable liquids, gases or dusts. Mortal
danger!
• Keep children away from the inspection lamp. Children are
unable to recognize the dangers associated with electricity.
• Unplug the inspection lamp from the power supply before
cleaning it. Clean the lamp regularly with a dry, lint-free
cloth. The cloth may be dampened slightly to remove
stubborn dirt, if needed. Do not use solvents, corrosive
cleaners or the like.
• The lamp does not contain any components that nee
servicing. Illuminants are not replaceable!
• The light source of this luminaire is not replaceable; when
the light source reaches its end of life the whole luminaire
shall be replaced.
• The external flexible cable or cord of this luminaire cannot
be replaced. If the cord is damaged, the luminaire should be
destroyed.
4