BIONIME GM300 Manual Del Usuario página 18

Performing a Test in Order
4) Twist off and set aside the protective cover of the disposable lancet.
5) Replace the depth adjustable cap.
6) Choose a depth of penetration by rotating the top portion of the depth adjustable cap
until the setting depth matches the window. Settings are based on skin type
" " for soft or thin skin;
" " for average skin;
" " for thick or calloused skin.
7) Hold the hub in one hand and pull on the plunger in the other hand. The device will be
cocked. Release the plunger, it will automatically move back to its original position
near the hub.
PRECAUTION
- Load the lancing device ( Refer to Instruction manual for the lancing device ).
- Be careful to load the lancing device to avoid being pierced by the needle.
32
4 5 Preparing your meter and strip
6
7
1. Remove new test strip from vial
4. Check that the code number blinking on your meter matches the code highlighted on the
2. Insert the test strip with
indication symbol, facing up,
and re-cap the vial cap
immediately. into test strip port.
vial of test strips currently in use.
Performing a Test in Order
3. Push the test strip in until it snaps and
stops. The meter turns on automatically.
When you put the strip into the strip
port, you will hear a sound of " beep ".
33