About Quality Control Test - BIONIME GM300 Manual Del Usuario

About Quality Control Test

What is quality control test ?
To make sure the monitoring system will work properly. It is necessary to do two kinds of quality controls.
1. Check Key Test
Please check your meter function by check key, the detail is shown in " Starting with Check Key " section on page 51.
2. Control Solution Test
If you finish the check key test without error, that only makes sure the meter is working properly.
You still have to use control solution to check if the strip and meter work together properly.
PRECAUTION
- The complete quality check should include check key test and control solution test. Before you do control
solution test, you have to do check key test first.
48
When should perform a quality control test ?
- Before doing a blood glucose test with your meter for the first time.
- When you open and start using a new vial of test strips.
- When you replace a new Smart Code Key, please check your meter by " CHECK KEY ".
- When your meter is dropped or splashed with liquids.
- Whenever you think your test result does not consistent with the way you feel.
- Whenever you want to check if your system is working properly or not.
- Whenever you want to practice testing and check correct procedure.
Required items for quality control tests
To perform a quality control test you have to prepare the items below :
®
- Rightest Meter ( with Smart Code Key installed )
- Rightest ® Blood Glucose Test Strips
®
- Rightest Control Solution
®
- Rightest Check Key
About Quality Control Test
49