Understanding Control Test Results; Caring For Your Meter - BIONIME GM300 Manual Del Usuario

Understanding Control Test Results

Your control solution test results should fall within the control solution range. That means your Rightest
working correctly.
Example of control solution range
Control Soultion Range
printed on your test strip vial label.
90-130 mg/dL
If control solution test results are out of control solution range, your Rightest
Repeat the quality control test. If your control solution results outside the range still exist, do not use the Rightest
System to test your blood glucose. And contact Bionime authorized distributor or Bionime Customer Service.
The reason your control solution results are out of the range :
- our control solution has expired or after 3 months since opened. Y
- Your test strip has expired.
- You leave the cap off the vial of test strips or control solution for a long time.
- You didn't perform the test proce dure correctly.
- Malfunction of the meter.
56
®
System is
®
System may not be working properly.
®
Maintenance
Keep your meter and test strip free of dust, water or any other liquid. Store the meter in the carrying case when not in use.
If meter is dropped or damaged, perform a quality control test with the check key and control solution before doing a
blood glucose test.
Cleaning Meter
Clean the outside of the meter with a damp cloth and mild soap/detergent. Prevent the test strip port and Smart Code Key
base from moisture.
Cleaning Smart Code Key
If your Smart Code Key is stained with blood, control solution or any liquid, please use a dry tissue or alcohol swab to
clean it up immediately. Do not use any thing wet to clean it. Perform a check key and quality control test to ensure the
system is working properly.

Caring for Your Meter

57