Comprehending Test Results And Messages - BIONIME GM300 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Performing a Test in Order
3. The testing result with time and date is automatically stored in your meter's memory. You
may also record the glucose value in your Log Book.
4. Rotate to remove the test strip. Please follow the local regulation and discard the used strip
properly.
5. Pull off the depth adjustable cap. Without touching the used disposable lancet, stick the
lancet tip into the protective cover.
6. Hold the release button in one hand and pull on the plunger in the other hand will safely
eject the used disposable lancet.
7. Discard the used disposable lancet into an appropriate puncture-proof or biohazard
container.
8. Replace the depth adjustable cap after finishing the test.
PRECAUTION
- The meter will power off automatically after 3 minutes no use. You can also turn off the meter by pressing the
main button for 2 seconds.
42
Blood glucose test results are shown on the meter as mg/dL, depending on which unit of measurement you have chosen.
Consult your healthcare professional before making any changes to your diabetes medication program.
If your blood glucose result is unusually high or low, or if you question your testing results, repeat the test with a new
5
6
2
test strip. You can also run a QUALITY CONTROL TEST with your Rightest
1
Solutions to check your meter and strip. ( Refer to page 48. ) If the test result still remains unusually high or low,
contact your healthcare professional immediately.
7
8
If you are experiencing symptoms that are not consistent with your blood glucose test results and you have made sure to
follow all instructions of this manual, contact your healthcare professional immediately.

Comprehending Test Results and Messages

®
Check Key and Rightest
®
Control
43

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido