BIONIME GM300 Manual Del Usuario página 19

Performing a Test in Order
5. While the " " symbol flashing, you are ready to apply the blood sample. The code number will appear
on the right down corner of the screen.
PRECAUTION
- Before " " appearing, please don't touch your blood drop to the sample entry on strip
because meter is doing a internal test. If you do so, the meter will show "
you will waste a strip
PRECAUTION
- To ensure accurate test results, make sure the code number on your meter matches the code highlighted on the
vial of test strips you are using.
- If the code number does not match, change the Smart Code Key to the right one and redo a test.
- If the meter turns off before you apply the blood sample, take out the unused test strip and reinsert it. You have
three minutes to apply the blood sample before the meter turns off automatically.
- Please follow the local regulation and discard the used strips properly.
34
" and " " and
Obtaining blood sample
1. Hold the lancing device to the soft side of your fingertip and press the release button to get a tiny
blood sample.
PRECAUTION
Before you take the blood sample, please make sure your fingertip for sampling is dry
thoroughly. Water or alcohol might affect the accuracy of testing.
2. Obtain a small blood drop on your finger
In order to get a more accurate measurement, suggest to discard the first drop of blood. ( The
first drop of blood from your fingertip might include some body liquid which might affect the
testing accuracy. )
3. You can start measurement by the second drop of blood.
Performing a Test in Order
35