Technical Data Sheet - McCulloch TRIMMAC Manual De Instrucciones

M
ODEL:
ENGINE
Cylinder displacement, cm
At maximum engine power, rpm
Maximum rotational frequency of the spindle, rpm
Engine speed at recommended maximum spindle
rotational frequency, rpm
Recommended speed idling, rpm
Maximum engine power, measured in
accordance with ISO 8893, kW
Catalytic converter muffler
IGNITION SYSTEM
Spark plug
Electrode gap, mm
FUEL AND LUBRICATION SYSTEM
Fuel tank volume capacity, cm
Fuel consumption at maximum engine power,
measured in accordance with ISO 8893, g/h
Specified fuel consumption at max. engine power,
measured in accordance with ISO 8893, g/kWh
WEIGHT
Weight without fuel, cutting attachment and guard, kg
NOISE EMISSIONS
(see Note 1)
Sound power level, measured dB(A)
Sound power level, guaranteed L
SOUND LEVELS
(see Note 2)
Equivalent sound pressure level at the operator s ear, measured
according to EN ISO 11806 and ISO 22868, dB(A)
Equipped with trimmer head (original)
VIBRATION LEVELS
(see Note 3)
Equivalent vibration levels (a
according to EN ISO 11806 and ISO 22867, m/s
Equipped with trimmer head (original), left/right
Note 1: Noise emissions in the environment measured as sound power (L
EC directive 2000/14/EC. Reported sound power level for the machine has been measured with
the original cutting attachment that gives the highest level. The difference between guaranteed
and measured sound power is that the guaranteed sound power also includes dispersion in the
measurement result and the variations between different machines of the same model according
to Directive 2000/14/EC.
Note 2: Reported data for equivalent sound pressure level for the machine has a typical statisti-
cal dispersion (standard deviation) of 1 dB(A).
Note 3: Reported data for equivalent vibration level has a typical statistical dispersion (standard
2
deviation) of 1 m/s .
Model
5/16 RH arbor shaft thread)
Approved accessories
Trimmer head

TECHNICAL DATA SHEET

3
3
dB(A)
WA
) at handles, measured
hv,eq
Type
TNG7 ( 2 mm line)
13
2
Cutting attachment / guard, part. no.
537419223 / 530096229
25
8000
10000
10000
4000
0,
Yes
Champion
0,6
340
407
768
3,9
8,9/7,5
) in conformity with
WA