HoMedics BPW-040 Manual Del Usuario página 17

BPW-040_C--01.indd 16
1. With the cuff wrapped around your wrist,
press the START/STOP button. Do not
inflate the cuff unless it is wrapped around
your wrist. All digits will light up, checking the
display functions. The checking procedure
will be completed after about 2 seconds.
2. After all symbols disappear, the display will
show a blinking "00". The monitor is "Ready to
Measure" and will automatically inflate the cuff
to begin measurement. The cuff will then begin
deflating as measurement continues.
Note: The monitor will re-inflate automatically
if the system detects that your
body requires more pressure for
measurement.
16
2013/1/24 上午10:46