Electronic Graphic Equalizer; Dspsurround - Aiwa AV-DV70 Manual De Instrucciones

ELECTRONIC GRAPHIC
EQUALIZER
DSP SURROUND
G:Q
GEQ
This unit provides the following five different equalization modes.
ROCK: Powerful sound emphasizing treble and bass
POP: More presence in the vocals and midrange
JAZZ:
Accented lower frequencies for jazz-type music
CLASSIC:
Enriched sound with heavy bass and fine treble
BGM:
Calm tone with suppressed bass and treble
Press one of the GEQ (Graphic Equalizer) buttons.
The selected mode name appears on the display for four
seconds, and the selected mode on the display is enclosed with
parentheses.
Selected mode
To
cancel the selected mode
Press the selected button again. 'iGEQ OFF appears on the
display.
To select with the remote control
Press the GEQ button repeatedly until the desired equalization
mode is displayed.
The DSP (Digital Signal Processor) surround circuits can recreate
the effect of sounds reflected from walls or ceilings, to obtain
the sound presence of real environments. There are four modes
with matching graphic equalization modes. Equalization modes
are selected automatically and can also be selected or turned
off to suit your preference.
Press one of the DSP buttons (DANCE, LIVE, HALL or
ARENA).
The selected mode name appears on the display for four
seconds, and the selected DSP and matching GEQ modes on
the display are enclosed with parentheses.
Selected DSP mode
Matching GEQ mode
When the music source is monaural
Select LIVE to obtain a simulated stereo effect. When DANCE,
HALL or ARENA is selected, no sound will be heard from the
surround speakers.
To cancel the selected mode
Press the selected button again. "DSP OFF appears on the
display. Even if canceling the selected DSP mode, the matching
or selected GEQ mode still remains.
To select with
the remote control
Press the DSP button repeatedly until the desired DSP mode is
displayed.
To adjust the volume and balance of the surround
speakers
Press the MANUAL SELECT button twice to display "SUR OdB
while the DSP system is turned on. Then press the DOWNYor
UPA button repeatedly within four seconds.
m
The DSP system is automatically canceled:
- When the Dolby Pro Logic is turned on
- When the "DOLBY DIGITAL SUR or"3 STEREO mode of
the Dolby Digital Surround is selected
The DSP system cannot be turned on:
- While the "DOLBY DIGITAL SLJR" or "3 STEREO" mode of
the Dolby Digital Surround is selected
- While the Dolby Pro Logic is turned on
- While headphones are plugged in
9
ENGLISH