Publicidad
Idiomas disponibles
Idiomas disponibles
CUSTOM AUDIO ADJUSTMENT
SUPER T-BASS SYSTEM
BBE
MUTING
BALANCE
VOLUME CONTROL
Turn the
VOLUME
control
on the unit, or press the VOLUME
buttons
on the remote control.
The volume
level is shown
on the display
for four seconds.
It
can be adjusted
between
O and MAX (31). It flashes
when set
over the level of 21.
The volume
level remains
memorized
even after the power
is
turned
off. However,
if the power is turned
off when the volume
is set to more than 17, it is automatically
set to 16 the next time
the power is turned
on.
To adjust the Ieft/right balance of the front speakers
Press the BALANCE
button to display
"L/R
OdB. Then press
the DOWNV
or UPA
button
repeatedly
within four seconds.
Note that the front speaker
balance
for the Dolby
Digital
and
Dolby Pro Logic modes is also changed.
To mute
the
sound temporarily
Press the MUTING
button (–20 dB).
"MUTE
ON" appears
on the display
for four seconds.
While
muting the sound, the selected
function
indicator
flashes.
Press
the MUTING
button again to restore the sound.
BBE SYSTEM
The BBE system enhances
the clarity of high-frequency
sound.
Press the
BBE button.
Each time it is pressed,
the level changes.
Select
one of the
three levels, or the off position
to suit your preference.
L
.,, , ,, . ...
:: ... . ......
... . ......
:: ... . ......
ma+i3El+EEl+ma
J
I (cancel)
m
The T-BASS
system
enhances
the realism
of low-frequency
sound.
Press the T-BASS button.
Each time it is pressed,
the level changes.
Select
one of the
three levels, or the off position
to suit your preference.
I
.... ......
:: .... ......
.... ......
:: .... ......
+aj!m+tE?iE3+mm3
-+cams
-1
(cancel)
m
Low-frequency
souncl maybe
distorted
when the T-BASS system
is used
for a disc clr tape
in which
low-frequency
sound
is
originally
emphasized.
In this case, cancel the T-BASS system.
SOUND ADJUSTMENT
DURING
RECORDING
The output
volume
and tone of the speakers
or headphones
may be freely varied 'without affecting
the level of the recording.
* The BBE system
is automatically
canceled:
- When the VIDEO
1 (DIGITAL)
or VIDEO 2 (DIGITAL)
function
is selected
- When the Dolby Pro Logic is turned
on
~ The BBE system cannot
be turned
on:
- While the VIDEO
1 (DIGITAL)
or VIDEO
2 (DIGITAL)
function
is selected
- While the Dolby Pro Logic is turned
on
ENGLISH
8
Publicidad
Capítulos
