Get Started; Install The Smartchip And Battery - Nokia 6282 Manual Del Usuario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

G e t s t a r t e d

1. Get started

■ Install the SmartChip and battery

Always switch the device off and disconnect the charger before removing
the battery.
Keep all SmartChips out of the reach of small children.
For availability and information on using SmartChip services, contact your SIM
card vendor. This may be the service provider, network operator, or other vendor.
This device is intended for use with the BP-6M battery.
The SmartChip and its address book can easily be damaged by scratches
or bending, so be careful when handling, inserting, or removing the card.
1. With the back of the phone facing
you, slide the back cover to remove it
from the phone (1).
2. To remove the battery, lift it as
shown (2).
3. To release the SmartChip holder,
gently pull the locking clip of the
card holder, and open it (3).
12

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido