Synchronize From A Server; Usb Data Cable; Call - Nokia 6282 Manual Del Usuario

Synchronize from a server

To use a remote Internet server, you must subscribe to a synchronization
service. For more information and the settings required for this service,
contact your service provider. You may receive the settings as a
configuration message. See "Configuration settings service," p. 10 and
"Configuration," p. 71.
If you have saved data on the remote Internet server, to synchronize
your phone, start the synchronization from your phone.
Select Menu > Settings
synchronization. Depending on the settings, select
synchronization or
Synchronizing for the first time or after an interrupted synchronization
may take up to 30 minutes to complete, if the address book or calendar
are full.

USB data cable

You can use the USB data cable to transfer data between the memory
card inserted in the phone and a compatible PC or a printer supporting
PictBridge. You can also use the USB data cable with Nokia PC Suite.
To activate the memory card for data transfer or picture printing,
connect the USB data cable; when the phone displays
connected. Select
Default mode—to use the cable for PC Suite
Printing—to print pictures directly from the phone using a
compatible printer
Data storage—to activate the memory card for data transfer
To change the USB mode, select
USB data cable >

■ Call

Select Menu > Settings
Call forwarding—to forward your incoming calls (network service).
You may not be able to forward your calls if some call restricting
functions are active. See
> Connectivity
Initializing copy.
mode., select OK. Select from the following modes:
Menu
Default mode, Printing, or
> Call settings
Call restrictions
> Data transfer >
Initializing
USB data cable
> Settings > Connectivity
Data storage.
and from the following options:
in "Security," p. 72.
S e t t i n g s
Server
>
69