Label Inside The Fire Helmet; Label On The Packaging; Instructions For Use - Dräger HPS 4500 Instrucciones De Uso

Ocultar thumbs Ver también para HPS 4500:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 22
Description
3.5.1

Label inside the fire helmet

1
3
2
1 Approving body
2 Standards according to which approval was granted
3 Serial number
4 Various markings (see table below)
5 Type of helmet and helmet size H1 or H2
6 Date of manufacture
7 Manufacturer
Marking
Explanation of the marking
CE 0158
ID No. of notified body
EN 443:2008
European Standard, upon which the
approval is based
DST
Manufacturer code
Dräger Safety AG & Co. KGaA
03/15
Example for production month and year
(March 2015)
type A
half shell helmet
48 - 61
Head circumference in cm for H2
56 - 64
Head circumference in cm for H3
UP-GF
code designation of helmet material (glass-
fibre reinforced, thermosetting plastic)
H2, H3
Helmet size H2, helmet size H3
Optional properties and markings
C
Chemical resistance
E2 E3
The fire helmet meets the electrical
insulation requirements in accordance with
EN 443:2008.
****
The fire helmet is designed for use in
temperatures down to -40 °C
Approved in accordance with MED
12
4
5
7
6
00931200.eps
3.5.2

Label on the packaging

Marking
Explanation of the marking
HPS 4500
Type of helmet
H2, H3
Helmet size 2, helmet size 3
REF
Order number
LOT
Serial number
CE0158
Approving body
Symbol for "See instructions for use"
3.5.3
Marking of the visors
The marking of the visors is engraved. It has the following
meaning:
Marking
Explanation of the marking
EN 14458:2004
European Standard, upon which the
approval is based
DST
Manufacturer code
Dräger Safety AG & Co. KGaA
R62494
Part number of the visor (example)
H2, H3
Visor for helm sizes H2 or H3
14
example for year of manufacture
+
symbol indicating suitability for fire fighting
=
symbol indicating suitability for general use
symbol for rating as face protection
symbol for "See instructions for use"
Optional properties and markings
-40 °C, +120 °C
Extreme temperatures the visor is
or
approved for
-40 °C, +60 °C
K
Abrasion resistance (according to
EN 168:2001, section 15)
Electrical properties
Dräger HPS 4500

Publicidad

Tabla de contenido
loading

Tabla de contenido