Safety Notes; Applications - IMG STAGELINE LC-324DMX Manual De Instrucciones

9 Button FADER to activate /deactivate the
faders (4)
10 Button FLASH; while this button is kept
pressed, any channels assigned to any spot-
lights selected will be set to their maximum
values
11 Button BLACK OUT to set any channels of
any spotlights to zero (blackout) and back
to the previous values
12 Switches to set the controller to the type of
spotlight used
13 Power supply jack to connect the power
supply unit provided
14 DMX signal output (3-pole XLR) for connec-
tion to the DMX input of the first spotlight

2 Safety Notes

The units (controller and power supply unit) cor-
respond to all relevant directives of the EU and
are therefore marked with
WARNING
The power supply unit uses
dangerous mains voltage .
Leave servicing to skilled per-
sonnel only . Inexpert handling
of the unit may result in elec-
tric shock .
•
The units are suitable for indoor use only . Pro-
tect them against dripping water, splash water
and high air humidity . The admissible ambient
temperature range is 0 – 40 °C .
•
Do not operate the controller and immedi-
ately disconnect the power supply unit from
the socket
1 . if one of the units is visibly damaged,
2 . if a defect might have occurred after a unit
was dropped or suffered a similar accident,
3 . if malfunctions occur .
In any case, the units must be repaired by
skilled personnel .
.
•
For cleaning only use a dry, soft cloth; never
use water or chemicals .
•
No guarantee claims for the units and no
liability for any resulting personal damage or
material damage will be accepted if the units
are used for other purposes than originally
intended, if they are not correctly connected,
or if they are not repaired in an expert way .
If the units are to be put out of oper-
ation definitively, take them to a local
recycling plant for a disposal which is
not harmful to the environment .

3 Applications

The controller LC-324DMX is used for easy and
independent DMX control of up to four LED
spotlights or spotlight groups with the same
channel functions . Spotlights with 3 – 8 DMX
channels can be used . The controller supports
the following spotlight functions:
RED = brightness of red LEDs
GREEN = brightness of green LEDs
BLUE = brightness of blue LEDs
WHITE = brightness of white LEDs
MASTER = total brightness (dimmer)
STROBE = strobe effect
Note: The functions available depend on the type of
spotlight used .
For each spotlight, one of 12 preset colours can
be selected on the controller . Alternatively, an
individual colour mix can be adjusted via con-
trols . In addition, the controller offers two colour
change programs with selectable speed (these
programs can also be music-controlled via the
internal microphone) and a program with col-
our fading . The strobe program allows strobe
effects even for spotlights without internal
strobe function .
11