Important Safety Instructions; Safety Signal Definitions; General Power Tool Safety Warnings; Work Area Safety - Oregon ST275 GSL Manual De Instrucciones

Important Safety Instructions

Introduction
This trimmer/edger is designed for regular maintenance trimming of grass and weeds using
flexible nylon trimmer line It is not designed to clear heavy brush or for use with any metal cutting
attachments Any other use other than stated is not recommended This product has been designed
in accordance with the state of the art safety technology of the time However, even with this
technology, it is recognized that residual risk, such as thrown objects, still exist The operator is
directed to closely read, understand, and follow all safety precautions to reduce potential injury
from these risks

Safety Signal Definitions

SYMBOL SIGNAL
WARNING
CAUTION
IMPORTANT

General Power Tool Safety Warnings

WARNING: Read and understand all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or
serious injury
Save all warnings and instructions for future reference. The term "Power Tool"
in the warnings refers to your mains-operated (corded) power tool or battery operated (cordless)
power tool

Work Area Safety

• Keep work area clean and well lit.
Cluttered or dark areas invite accidents
• Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes
• Keep children and bystanders away while
operating a power tool (Fig. 1). Distractions
can cause you to lose control
FIG. 1
Trimmer/Edger Model ST275-GSL
Important Safety Instructions
MEANING
Indicates a potential hazard which could result in serious injury
Indicates a potential hazard which could seriously damage the tool or
cause minor to moderate injury
Following this instruction will increase satisfaction with the tool
CAUTION: Establish a bystander safety
zone of 20 ft (6 m) prior to operation of this
equipment. Bystander safety zone is a 20 ft (6
m) circle around the operator that must remain
free from bystanders, children, and pets

Electrical Safety

• Power tool plugs must match the outlet.
Never modify the plug in any way. Do
not use any adapter plugs with earthed
(grounded) power tools. Unmodified plugs
and matching outlets will reduce risk of
electric shock
• Avoid body contact with earthed or
grounded surfaces such as pipes,
radiators, ranges and refrigerators. There
is an increased risk of electric shock if your
body is earthed or grounded
5