Technical Specifications - CAMPAGNOLA SHAMAL ULTRA Manual Del Usuario

RIM:
HUB FLANGE SIZE:
FW BODY:
DISC:
INFLATION PRESSURE:
USAGE:
IMPORTANT:
In the case of use under particularly severe environmental conditions (dust, rain, mud, etc.), it is highly recommended to have a specialized mechanic
add CX-Gravel seals.
WARNING!
Only use genuine Campagnolo spokes for your specific type and model of wheel. Failure to use correct spokes can result in an accident, personal
injury or death.
To correctly assess wheel tension a tensiometer must be used: do not go by the tension you feel manually. It is therefore essential to have all the
spoke replacement operations carried out by a Campagnolo Pro-Shop, a Campagnolo Service Centre or a mechanic specialised in assembly and main-
tenance on Campagnolo wheels. The spoke part numbers can be found in the spare parts catalogue which is downloadable from our website www.
campagnolo.com.

1 - TECHNICAL SPECIFICATIONS

1.1 - WHEEL TECHNICAL SPECIFICATIONS
front: 100 mm Quick Release / Thru Axle 12 mm
Campagnolo 9s/10s/11s/12s - Shimano 9s/10s/11s - XD Sram 11s/12s
see the inflation pressure recommended by the tyre's manufacturer
only with racing bicycles fitted with disc brakes and without any form of electrical drive system, used on
tarmac roads or for trekking and cyclocross
1.2 - SPOKES TECHNICAL SPECIFICATIONS
700C (622x17C)
rear: Quick Release / Thru Axle 12 - 142 mm
Axial Fixing System
3