• Fit the rotor into its seat, taking care with the direction of rotation indicated by the arrow (Fig. 28).
• Fit the washer (A - Fig. 28) and screw the provided lockring (B – Fig. 28).
• Tighten the lockring to 40 Nm (354 in.lbs) using the tool UT-BB130 (C - Fig. 28 - not provided)
and torque wrench (D - Fig. 28).
ATTENTION! NOTE FOR SPECIALIZED MECHANICS
CONTACT YOUR CAMPAGNOLO
AND HUBS, OR YOUR CAMPAGNOLO DEALER.
Note
We recommend that you contact a specialized mechanic for all the assembly, disassembly and all hub, rim and spoke replacement operations. Choose
with him the most suitable interval of inspections for you on the basis of the conditions of use and intensity of your activities (e.g. racing, rain, salted
roads, muddy roads, cyclist's weight, etc.).
5.1 - ASSEMBLING THE ROTOR ON AXIAL FIXING SYSTEM
6 - PERIODIC MAINTENANCE
SERVICE CENTER FOR THE INSTRUCTIONS FOR ASSEMBLING, MAINTAINING AND REPLACING RIMS, SPOKES