CAMPAGNOLA SHAMAL ULTRA Manual Del Usuario página 23

2-Way Fit rims are designed for both tubeless and standard clinchers.
2.1 - INSTALLING CLINCHER TIRES
WARNING!
RIM-TIRE COMPATIBILITY
All Campagnolo rims are made with very precise dimensionally. If a
tire is too easy to install on a Campagnolo rim, that tire is most likely
too big and will not seat properly on the rim. If a tire is too difficult
to install, that tire is most likely too small. Use only high quality tires
that require the use of tire levers and a reasonable installation effort.
Using talcum powder on the tire will make installation easier. Using a
tire that does not fit properly on the rim can cause sudden and unex-
pected tire failure, resulting in an accident, personal injury or death.
• Before mounting the clincher tyres, ensure that the diameter indica-
ted on the clincher tyre is 622 mm and that the width of the clincher
tyre is compatible with the width of the rim based on the ETRTO rim/
clincher tyre compatibility table ("European Tyre and rim technical
organisation standard manual - 2007"- Pag. 18).
WARNING!
Failure to properly install the tire can cause sudden and unexpected
loss of tire pressure, resulting in an accident, personal injury or death.
4
2 - TIRES
TYRE
RIM
1
Be sure that you do not damage or otherwise bend any portion of the rim
when installing the tire. Be careful not to damage or bend any part of the
rim when mounting the tyre. Damaging the edge of the rim can compromise
its operation, especially when using tubeless tyres. Check that the inside
of the tyre and rim are perfectly clean; clean them with a cloth if necessary.
WARNING: If you are unable to fit and remove the tyres by hand use pla-
stic tyre levers (never use metallic levers because you could damage the
rim and the tyre).
• Fit the first bead of the tyre into the rim groove (Fig. 1) starting from the
point opposite the valve.
• Introduce a partially inflated presta inner tube into the tyre (Fig. 2).
BEAD
2