Setting Into Operation; Adjusting The Speed - IMG STAGELINE QUAD FLOWER Manual De Instrucciones

3 Applications
This LED light effect unit is suitable for applications
on stage, in discothèques, clubs and party rooms.
It is equipped with 224 super bright LEDs (divided
into 4 groups with 56 LEDs each) creating different
effects of circle patterns consisting of light spots in
blue, red, green and white.
The light effect unit is designed for control via a
DMX light controller (4 or 7 DMX channels to be
selected). However, it can also be operated without
controller, either as an individual unit or intercon-
nected with several LED-380RGBW units in the
master / slave mode.
4 Mounting
G
Always place the unit in such a way that a suffi-
cient air circulation will be ensured during opera-
tion. Never cover the air vents at the housing
(e. g. by curtains).
G
The minimum distance to the illuminated area
should be 50 cm.
For suspended mounting tightly screw the unit via
the bracket (1) to a suitable place, e. g. to a cross
bar or a lighting stand. To align the unit, release the
locking screws (2). Adjust the desired inclination of
the unit and retighten the screws.
WARNING Mount the light effect unit safely and
expertly. If the unit is installed at a
place where people may walk or sit
under it, additionally secure it, e. g. by
a safety rope. Lead the safety rope
through the safety lug (3) and fix it so
that the maximum falling distance of
the unit will not exceed 20 cm.

5 Setting into Operation

WARNING Never look directly into the light
source, this may cause eye damage.
Please note that stroboscope effects
and fast changes in colour may trigger
epileptic seizures with photosensitive
persons or persons with epilepsy!
Connect the mains cable supplied to the mains jack
(4) and the plug to a socket (230 V~ / 50 Hz). Thus,
the unit is switched on and the last operating mode
adjusted is activated. To switch off the unit, discon-
nect the mains plug.
For a more convenient operation, it is recom-
mended to connect the unit to a socket which can
be switched on and off via a light switch.
Caution: Do not connect the unit to the mains volt-
age via a dimmer!
5.1 Switching the display on /off
To switch off the display (9), first press the button
FUNC (11) so many times until the display shows
. Then press the button UP or DOWN (12): the
display will be extinguished.
To switch on the display again, press the button
UP or DOWN (the display shows
press the button MODE so that the display shows
the operating mode again.
6 Operation without Controller
6.1 Blackout mode, music mode and
automatic mode
To set the unit into the blackout mode, music mode
or automatic mode, press the button MODE (10) so
many times until the "G" mode presently adjusted
– or
,
Then select the desired mode from the three
modes with the button UP or DOWN (12).
– Blackout mode (LEDs off)
– Music mode
If music is played at sufficient volume with a clear
rhythm in the bass range, the run of the light
effects will be synchronized to the beat of the
music via the integrated microphone (13).
Advance the control (8) for the microphone sen-
sitivity clockwise so that the unit responds to the
music as desired. When changing the volume at
the music system, also the sensitivity of the
microphone has to be adapted accordingly.
– Automatic mode (automatic light show)
6.2 Chase modes (running light effects)
26 chase modes –
the mode no chase effect is executed but a
fixed light pattern is radiated (all LEDs light up).
To switch the unit into a chase mode, press the
button MODE (10) so many times until the "C"
mode presently adjusted is shown on the display
(9). Then select the desired mode with the button
UP or DOWN (12).

6.3 Adjusting the speed

For music mode, automatic mode and chase
modes, the speed can be adjusted from
. Press the button FUNC (11) so many times
until the speed presently adjusted is shown on the
display (9). Then select the desired speed with the
button UP or DOWN (12).
Press the button MODE (10) so that the display
shows the operating mode again.
). Then
– is shown on the display (9).
to – are available. In
GB
to
9